The AJS Cadwell will take you back to a time where motorcycles were built for fun and excitement, where British bikes ruled and rock n roll was the language of youth. The Cadwell beautifully recaptures the spirit of the motorcycles of the 50's and 60's where owners would modify their bikes into the style of Café Racers.
The AJS Cadwell is a bike that's perfect for both urban and open-road adventures!
It’s lightweight, low seat height makes it easy to handle with precision through every twisty turn.
Its charm will make you smile all the way from one café stop to another!
Technical Details (Euro 5)
Engine type: 4-stroke, OHC, air cooled, single cylinder
Displacement: 124cm³
Bore x Stroke: 54 x 54mm
Compression Ratio: 10:1
Max. power: 7.33kW @ 9,000 rpm
Max. Torque: 9.5Nm @ 6,500 rpm
Tank capacity: 11.2L
Fuel type: Unleaded or E5 petrol
Transmission: five speed, chain drive
Unladen Mass: 113kg
Max laden mass: 274kg
Max load: 150kg
Starter: electric and kick
Generator nominal output: 100VA
Battery: 12v 9Ah
Brakes: 300mm front single disc/ 210mm rear disc (Combined Braking System)
Wheel rims: Front: 17 x MT2.5 Rear: 17 x MT3.50
Tyres: Front: 110/70-17 Rear: 130/70-17
Seat height: 740mm
Length: 2040mm
Width: 720mm
Height: 1060mm
Wheelbase: 1330mm
Odometer: km
Speedometer: Dual marked
Max Speed: (approx): 60mph
Fuel consumption: (as recorded on the COC) 128mpg
Emissions: 47 g/km
Maintenance Information
Tyre pressure - front: 33 psi solo or with passenger (not to exceed 36psi)
Tyre pressure - rear: 33 psi solo or with passenger (not to exceed 36psi)
Tappet clearance In: 0.15mm
Tappet clearance Ex: 0.15mm
Engine oil type: 10w40 Class API, SG (Silkolene Super 4)
Engine oil quantity: 1.0 - 1.1L (check on dip stick)
Spark plug type: NGK CR6HS (x1)
Air filter part number: 1690100-050000
Oil filter part number: Gauze type, clean and replace
Front fork oil capacity: 220cc (each leg)
Front fork oil type: RSF 7.5
Torque Settings:
Front axle nut 45Nm
Rear axle nut 65Nm
Steering stem nut 30Nm
Swinging arm axle nut 60Nm
Rear sprocket nut 30Nm
Cylinder head bolt M8 x 1.25 22Nm
Spark plug M10 x 1.00 12.5Nm
Magneto rotor 70Nm
General 8.8 or 9.8 fasteners:
M6 10Nm
M8 25Nm
M10 50Nm
M12 85Nm
For more information refer to your Owner's Hand Book or contact your nearest AJS Dealer.